EELD601 - EVAP-Approved Smoke Machine
(Standard Model)

• 2-Year Warranty
• Free refill of UltraTraceUV® ultraviolet smoke
solution, good for about 1,000 tests!
Most economical OEM EVAP-Approved model
Utilizes OEM-approved licensed technology from STAR EnviroTech, Inc., the only technology designed for and capable of being used with nitrogen, for safer EVAP testing!  Uses shop air for general purpose leaks
Can connect right to tire inflation nitrogen generator
Patented UltraTraceUV® solution - the only OEM-approved dye
Basic EVAP and general purpose applications
No manual flow control valve to worry about turning off! Our auto shutoff safety valve stops gas fumes from potentially filling your work bay
Auto-Correct EVAP pressure - not adjustable to avoid possible pressure damage to vehicle
Works with nitrogen or shop air to meet all OEM test requirements for all makes and models
Full range flow meter covers all EVAP leak ranges: gross (.080") small (.040") and very small (.020")
500 tests per refill 
User refillable


2-Year Warranty

Additional leaks found with EELD601

• Vacuum Leaks
• Exhaust Leaks
• EGR Leaks
• Under Dash Leaks
• Throttle Body Components
• Brake Booster Leaks
• Turbo and Supercharger
• Head Gasket Leaks
• Vacuum Subsystems
• Injector O-Ring Leaks
• Wind/Water Leaks
• Oil Leaks
• Air Injection Leaks
• MAP Sensor Leaks
• ...and many more

Height 15 in. (38.1 cm) Supply Pressure 13 in./H2O (0.032 bar)
Width 8 in. (20.3 cm) Supply Volume 15 LPM
Length 15 in. (38.1 cm) Operating Temp. Range 45ºF to 140ºF
Net Weight 23 lb. (10.4 kg) (7.2ºC to 60ºC)
Shipping Weight 26.5 lb. (12.0 kg) Smoke Supply Line 10 feet (3m)
Power Supply 12 volts DC Power Supply Line 10 feet (3m)
Power Consumption 15 amps. Remote Starter Cable 10 feet (3m)

To DOWNLOAD: PC Right-Click or Mac Option-Click

PDF Flyer (450 KB) | PDF TriFold (2.1 MB) |
Operator Manual (PDF 1.0 MB) | Hi-Res Photo (JPG 3.2 MB)
PowerPoint Presentation (3.2 MB)
EELD601 Included Accessories
Product ID: WVA-01

Exhaust Cone Adapter

Exhaust Cone 6" in length and tapered from 1" to 3 1/2", the Exhaust Cone is designed for use in diagnosing exhaust system leaks. Made from EPDM rubber with a neoprene inlet hose, the Exhaust Cone has a 3/8" smoke channel and will fit a wide variety of tailpipe diameters.


Product ID: WVA-02

Assorted Cap-plug Set

Cap Plug Kit Ranging in sizes from 1 3/4" to 4 1/2" and 1/8" to 3/16", these accessories are designed to seal a wide range of openings. Useful for inside and outside diameter openings, each cap plug is made from molded vinyl.

Product ID: HS400AC

400,000 CP Halogen Spot Lamp
(20' power leads & clips)

This heavy duty 400,000 candle power halogen spotlight makes the existing smoke even easier to see.


Product ID: WVA-06

EVAP Service Port Adapter Fitting
(Standard Size)

Evap Service Port Kit (OBD-II) Standard size adapter; connects to most factory-installed fittings for accessing OBD-II EVAP system.


Product ID: WVA-049

Dual-Size Schrader Removal/Installation Tool

Removal and Installation tool for EVAP service ports.


Product ID: P0716UV

UltraTraceUV® Smoke Solution (16 oz)
(Unit arrives full)

This is a 16 oz. bottle of OEM-Approved UV smoke producing solution, good for about 500 tests.

-EELD601 Optional Accessories
Product ID: WVA-050

Cart Station

Exclusive heavy-duty, black powder-coated cart holds the EVAPro or EELD601 securely in place allowing for easy transport anywhere in the service bay. A specially designed tray conveniently carries nitrogen tank.  Extra lower shelf holds accessories, hand tools and more.


Product ID: 200-22-227NG

Pre-set Gas Flow Regulator 100 PSI

100 PSI pre-set Gas Flow Regulator .  No adjustments to fool with, always guarantees proper operating pressure for any Vacutec Smoke machine.  Easily connects to nitrogen cylinder and to coiled hose (Part No. WVA-041). 


Product ID: 060-30iw

Calibration Gauge Kit

Calibrate any OEM EVAP-Approved Tester in the field... Verifies tester's system pressure; verifies .040" and .020" standards and verifies accuracy of pressure gauge on testers that include a pressure gauge.


Product ID: 16345

UV Light

Twelve LEDs produce hi-intensity true UV light. Includes battery charger and UV enhancing glasses.


Product ID: WVA-03

Smoke Diffuser (for finding wind/water leaks)

Smoke Diffuser Made of molded polyvinyl, the smoke diffuser is resistant to chemicals and abrasion. The Smoke Diffuser slows and concentrates the EVAPro smoke for use in diagnosing wind and water leaks in vehicle passenger compartments.


Product ID: WVA-041

1/4" x 25' Coiled Hose
(Nitrogen hose to Evap Tester)

Coiled-hose. This 25' coiled hose connects between the nitrogen cylinder and smoke machine.  Connect the 1/4 pipe-thread to the nitrogen regulator and the quick-disconnect fitting to the smoke machine.


Product ID: WVA-042

EVAP Service Port Adaptor Fitting (Small Size)

Fits some Ford products.