EVAPro/2000E - EVAP-Approved Smoke Machine
(Full Feature)

    • 2-Year Warranty
    Comes with Free refill of UltraTraceUV® ultraviolet
      smoke solution, good for about 1,000 tests!
    Utilizes OEM-approved licensed technology from
      STAR EnviroTech, Inc. the only technology
      designed for and capable of being used with
      nitrogen, for safer EVAP testing! Uses shop air
      for general purpose leaks
    Can connect right to tire inflation nitrogen generator
    Full-featured design; the same technology chosen
      by many OEMs for EVAP testing
    Simple control valve dial selects precise internal
      orifice calibration for 020" / 040". and "future"
    Patented UltraTraceUV® solution deposits a
      fluorescent dye at the exact location of the leaks
      and is the only dye approved by automakers
    Two-minute Pass / Fail feature verifies .040"
      or .020" leaks in OBD-II vehicles
    Will not void OEM factory warranty
    Smoke out OBD-II EVAP codes
    All accessories included
    500 tests per refill
    User refillable
    A must tool for OBD-II EVAP testing & general
      purpose leak testing
    Microprocessor technology

    >> click here to compare product features and benefits <<


    2-Year Warranty

    Additional leaks found with EVAPro/2000E

    • All EVAP System Leaks
    • Vacuum Leaks
    • Exhaust and EGR Leaks
    • Under Dash Leaks
    • Throttle Body Components
    • Brake Booster Leaks
    • Turbo and Supercharger

      • Head Gasket Leaks
      • Vacuum Subsystems
      • Injector O-Ring Leaks
      • Wind/Water Leaks
      • Oil Leaks
      • Air Injection Leaks
      • MAP Sensor Leaks
      • ...and many more
    Height 15 in. (38.1 cm) Supply Pressure 13 in./H2O (0.032 bar)
    Width 8 in. (20.3 cm) Supply Volume 15 LPM
    Length 15 in. (38.1 cm) Operating Temp. Range 45ºF to 140ºF
    Net Weight 23 lb. (10.4 kg) (7.2ºC to 60ºC)
    Shipping Weight 26.5 lb. (12.0 kg) Smoke Supply Line 10 feet (3m)
    Power Supply 12 volts DC Power Supply Line 10 feet (3m)
    Power Consumption 15 amps. Remote Starter Cable 10 feet (3m)
    DOWNLOAD: PC Right-Click or Mac Option-Click

    PDF Flyer (450 KB) | PDF TriFold (2.1 MB) |
    Operators Manual (2.7 MB) |
    JPEG: Hi-Res Photo (1 MB) | PowerPoint Presentation (1.6 MB)
    EVAPro/2000E Included Accessories
    Product ID: WVA-01

    Exhaust Cone Adapter
    (two included with model 2000E)

    Exhaust Cone 6" in length and tapered from 1" to 3 1/2", the Exhaust Cone is designed for use in diagnosing exhaust system leaks. Made from EPDM rubber with a neoprene inlet hose, the Exhaust Cone has a 3/8" smoke channel and will fit a wide variety of tailpipe diameters.


    Product ID: WVA-02

    Assorted Cap-plug Set

    Cap Plug Kit Ranging in sizes from 1 3/4" to 4 1/2" and 1/8" to 3/16", these accessories are designed to seal a wide range of openings. Useful for inside and outside diameter openings, each cap plug is made from molded vinyl.

    Product ID: HS400AC

    400,000 CP Halogen Spot Lamp
    (20' power leads & clips)

    This heavy duty 400,000 candle power halogen spotlight makes the existing smoke even easier to see.


    Product ID: WVA-06

    EVAP Service Port Adapter Fitting
    (Standard Size)

    Evap Service Port Kit (OBD-II) Standard size adapter; connects to most factory-installed fittings for accessing OBD-II EVAP system.


    Product ID: WVA-049

    Dual-Size Schrader Removal/Installation Tool

    Removal and Installation tool for EVAP service ports.


    Product ID: P0716UV

    UltraTraceUV® Smoke Solution (16 oz)
    (Unit arrives full)

    This is a 16 oz. bottle of OEM-Approved UV smoke producing solution, good for about 500 tests.


    Product ID: WVA-03

    Smoke Diffuser (for finding wind/water leaks)

    Smoke Diffuser Made of molded polyvinyl, the smoke diffuser is resistant to chemicals and abrasion. The Smoke Diffuser slows and concentrates the EVAPro smoke for use in diagnosing wind and water leaks in vehicle passenger compartments.


    Product ID: WVA-041

    1/4" x 25' Coiled Hose
    (Nitrogen hose to Evap Tester)

    Coiled-hose. This 25' coiled hose connects between the nitrogen cylinder and smoke machine.  Connect the 1/4 pipe-thread to the nitrogen regulator and the quick-disconnect fitting to the smoke machine.


    Product ID: WVA-042

    EVAP Service Port Adaptor Fitting (Small Size)

    Fits some Ford products.

    -EVAPro/2000E Optional Accessories
    Product ID: WVA-050

    Cart Station

    Exclusive heavy-duty, black powder-coated cart holds the EVAPro or EELD601 securely in place allowing for easy transport anywhere in the service bay. A specially designed tray conveniently carries nitrogen tank.  Extra lower shelf holds accessories, hand tools and more.


    Product ID: 200-22-227NG

    Pre-set Gas Flow Regulator 100 PSI

    100 PSI pre-set Gas Flow Regulator .  No adjustments to fool with, always guarantees proper operating pressure for any Vacutec Smoke machine.  Easily connects to nitrogen cylinder and to coiled hose (Part No. WVA-041). 

    Product ID: 060-30iw

    Calibration Gauge Kit

    Calibrate any OEM EVAP-Approved Tester in the field... Verifies tester's system pressure; verifies .040" and .020" standards and verifies accuracy of pressure gauge on testers that include a pressure gauge.


    Product ID: 16345

    UV Light

    Twelve LEDs produce hi-intensity true UV light. Includes battery charger and UV enhancing glasses.